Jc65 Skid Steering Loader Lgce Mining Wheel Loader with Eac for Exporting

• Customization: Available
• After-sales Service: 1200working Hours
• Warranty: 1200working Hours
• Model NO.: JC65
• Condition: New
• Rated Load: 1-3t
• Transmission: Hydraulic - Mechanical
• Load and Unload Mode: Front Discharge
• Walking Mode: Wheeled
• Type: Small Loader
• Transport Package: Container
• Specification: 2ton
• Trademark: LAITUO
• Origin: China
• HS Code: 84295100
• Production Capacity: 5000units Per Year
• Package Size: 220.00cm * 120.00cm * 120.00cm
• Package Gross Weight: 996.000kg

Product Description

ML580 MOUNTED ON MINI  SKID STEERING  LOADER

Item	With Chevron Engineering Tyre
Max working height H1	2143mm	84.37inch
Max dump height H2	1488mm	58.58inch
Total Height H	1233mm	48.54inch
Max pin height	1884mm	74.17inch
The length of the foot plate	678 mm	26.7inch(foot plate level)
Total length with bucket L ( mm)	2206mm	86.9inch
Highest point dump distance L1(mm)	348mm	13.7inch
Length without bucket L2(mm)	1752mm	69inch
Bucket width B(mm)	980mm	38.6inch
Total width B1(mm)	1160mm	45.67nch
Wheel base	940mm	37inch
Ground clearance(mm)	118mm	4.65inch
Turning radius R(mm)	1307 mm	51.5inch
Bucket dumping angle α(°)	30
Rollback of bucket on ground β(°)	25
Departure angle(°)	11(foot plate level)

Product Description

28HP V Twin Cylinder Horizontal Shaft OHV Gasoline Engine With Electric Start

The Rato® 739cc OHV Horizontal Shaft Engine with max 18.5kW(25HP)@3600RPM and 47N.m@2500RPM. It has enough power to run a wide range of equipment, including portable sawmills,log splitters, pressure washers, air compressors, go-karts, water pumps and chippers/shredders. 


OHV design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides long usage life.It is reliable, easy starting and quiet running. Low oil shutdown turns the engine off if it runs low on oil, preventing serious damage or failure.
Specification

Model	R740D	Engine Type	OHV, V-twin
Bore x Stroke	82 x 70mm	Displacement	739cc
Compression Ratio	8.5 : 1	Start Type	Electric Start
Net Torque	47N.m@2500RPM	Rated Output	16.8kW@3600RPM
Maximum Output	18.5kW@3600RPM	Muffler	Yes
Fuel Consumption	370g/kW.h	Shaft Output	Horizontal
Crankshaft	Key type	Cooling System	Air cooled
Fuel Type	Gasoline	Fuel Tank	No
Low Oil Alert	Yes	Low Oil Shutdown	Yes
Oil Capacity	1.6L	Lubrication System	Forced splash
Governor System	Electronic & mechanical	Carburetor	Flat suction valve
Net Weight	45kg	Gross Weight	50kg
Dimension(LxWxH)	55 × 46 × 34.5cm	Certificate	CE/EPA
Available Option	PTO shaft	Warranty	1 Year
Shaft Rotation	(From PTO Shaft Side) Counterclockwise
Application	Pressure washer, pump, air compressor, water pump, log splitters, go-karts and etc.

Features + Benefits

OHV design for increased efficiency and optimal power transfer
High compression ratio for better fuel efficiency

Low vibration from precision-engineered components
Cast iron cylinder sleeve 
Low oil shutdown turns the engine off if it runs low on oil, preventing serious damage or failure

Technical Parameter:

Item SLM380		Item
Engine	Rated power(KW)	15.4KW(21HP)
	Rated speed(rpm)	3300
Noise (Db)		95
Hydraulic system	Hydraulic pressure(Mpa)	17
	Cycle time(s)	Raise	Dump	lower
		4.27	1.34	3.31
Technical Parameter	Operating Load	200 Kgs	441lb
	Bucket Capacity	0.15 m^3	5.33(ft ^3)
	Max Lifting Force	375 Kgs	827lb
	Travel Speed	0-5.5Km/h	0-3.4mile/h
	Operating Weight	890 Kg	1958lb(With Chevron Engineering Tyre )
Tires		18*6.5-8

 

Option:

1.Close Cabin

2.Joystick Control System

3.Imported Diesel Engine ,Yanmar,Kubota

4.Air condtion

Our JC45G can use many different attachments for different purpose,for example,pallet fork,4 in 1 bucket,dozer blade,snow blade,grapple bucket,fork grapple,backhoe,sweeper,angle broom,breaker,trencher,auger,vibratory roller,mixer,snow blower,grass cutter,rock buket,bale hanlder,Utility fork,scaper,roto tiller,tree shear,tree spade,forest mulcher etc,pls have a look for their photos


 

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.