New Condition Loader, CE Wheel Loader, CE Approved Loader, CE ISO Loader, Euro 5 Engine Wheel Loader, Loader with New Cabin

• After-sales Service: 12months
• Warranty: 1200 Working Hours
• Certification: ISO, CE, Eac
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CPCD40, LT40F
• Condition: New
• Rated Load: 3-6t
• Transmission: Hydraulic - Mechanical
• Load and Unload Mode: Front Discharge
• Walking Mode: Wheeled
• Type: Medium-sized Loader
• Engine: Yto
• Color: Yellow,Green,Red
• Country: Germany
• Sender: China
• Size: Small, Middle,Huge
• Transport Package: in Container
• Specification: 16500kgs
• Trademark: LAITUO
• Origin: China
• HS Code: 842951
• Production Capacity: 2000units Per Year
• Package Size: 480.00cm * 200.00cm * 190.00cm
• Package Gross Weight: 3800.000kg

Product Description

Feautures:Explosion proof loader underground loader ZL50KA with EAC

Main specification and characters of LT956U underground wheel loader

1. The ultra-low chassis and the side cabin offer comfortable, safe, reliable driving experiences in ultra-low mines.

2.The large steering angle makes it suitable for flexible operation in narrow mine tunnels

3.Big light more safe.

4. Power shift gear-box, good reliability easy to maintain

5. Large capacity battery. continuous lighting work for 5 hours.

6. Higher efficiency. loading withdraw coal up to 120 Cubic meter in one hour.

7. Side seat design draw on the experience of Scooptram side seat.greatly improved the front and rear visual range.

8. CUM.MINS 160KW 6 cylinders engine.china made 162KW optional.

9. Integrated torque converter transmission.The smaller and more compact structure, small occupied space.

10. Specifically tailored for the mine operation counter-shaft power-shift gearbox, YJ280 torque converter.

11. Air over hydraulic break system, caliper break system.Wet brake axle available according to requirement..

12. Over load protection system.Disc brake shield,All LED light.Alarm lamp excavator teeth.

13.New design layout of the Hood.Increase counterweight in the front.

14.Optional:Joystick control;Wheel protection chains;Smooth anti puncture narrow tire.

Side dump bucket;Breaking hammer;Narrow bucket without teeth.

Specifications:

Performance	Rated load	5000kg
	Overall weight	17100kg
	Rated bucket capacity	3m^3
	Maximum tractive force	150KN
	Maximum breakout force	≥132KN
	Maximum grade ability	30ºC
	Maximum dump height	2200mm
	Maximum dump reach	1400m
	Overall dimension (L×W×H)66	6640×3200×2190mm
	Minimum turning radius	3400mm
Engine	Model	WEICHAI
	Type	In-line arrangement, water cooling, four-stroke
	No. of cylinder-bore/stroke	6-108×115mm
	Rated power	162kw--2400r/min
	Maximum torque	410N.m
	Min fuel-consume ratio	≤223g/kw.h
Transmission system	Torque converter	zl50
	Gearbox mode	Power shift normally engaged straight gear
	Gear shift	2 forward shift  2reverse shift
	Maximum speed	30km/h
Drive axles	Main reducing spiral	bevel gear grade 1reduction
	Decelerating mode	planetary reduction,grade 1
	Wheel base (mm)	2750mm
	Wheel tread	2590mm
	Minimum ground clearance	400mm
hydraulic system	System working pressure	16MPa
	bucket lifting time	≤3.25s
	bucket falling time	≤2.3s
	total time for a signle working cycle	≤6.5
	Function of leveling automatically	yes
Brake system	Service brake	air over hydraulic disc brake on 4 wheels
	Parking brake	manual parking brake
Tyre	Type specification	23.5-25   or 2000-24
	Front tyre pressure	0.4Mpa
	Rear tyre pressure	0.35Mpa
optional	protection chain
	side unloading
	three way catalytic converter

Q1: Are you a factory?

A1: Of course. we are established in 2010, is a national hi-tech enterprise, which owns the unique combination of scientific research, development, production, sale and service.

Q2: Can you customized products? OEM products or ODM products?

A2: Yes, we can provide customized products according to your requirement. Both OEM and ODM are acceptable. We do a lot ofnon-standard products, welcome your special custom-made.

Q3: What's the specification of the chargers?

A3: we have all kinds of the chargers and welcome the customers to custom-made.

Q4: How about the delivery time?

A4: Usually we producing time is 7 working days after we receive the advanced payment,The specific order quantity needs to be adjusted, and it can be delivered within 7 days.. For some standard products, we have most in stock and could delivery immediately.

Q5: Do you have agent or representative abroad?

A5: Yes, we have 4 branches around the world, namely Australia, Turkey, Thailand, and the United States; we have a total of 168 agents around the world that can provide different products and services;

Q6: Can we print the LOGO on products?

A6: Yes, New Newton can provide you with OEM service for free according to the requirements you provide

Q7: What is your payment term?

A7: T/T or L/C or Western Union, and more payment methods, it all depends on your decision, if you want any other way, please contact us.

Q8: What can I get from cooperating with NEW NEWTON?

A8: 1. Unique products, with customized service.

       2. Timely production and delivery, time is money.

       3. Market protection service, long term business strategy.

       4.High-quality products at the most economical price.

       5.24-hour online service to help you quickly solve all product and use design problems.